Newest AI Smart Watch With Bluetooth Earphone

1. Basic functions
Ai Smart, iPhone Siri
TWS stereo headphones, single or two simultaneous use
Heart rate test,Blood pressure test
Step counting, mileage, consumption
Sleep monitoring, sedentary reminder, lifting wrist screen
WeChat, SMS push,Shake a picture
2. Software download
A: iPhone to Apple AppStore store to search for “AMKang” software and download.
B: Android downloads the AMKang software by QR code recognition.
4.BLE connection device and pairing
1) BLE connection: Search for the device model and connect in the Settings > Device interface of the APP.
After the connection is successful, the device model AMKang will be displayed under the My Device of the APP, and the upper left corner of the time interface on the device can be seen. Bluetooth successfully connected the symbol. If you do not see the symbol indicating that the connection is unsuccessful, please re-operate. The time is automatically synchronized when the connection is successful.
2) After the first connection is successful, the device will be automatically connected after the device is turned off and the signal range is turned off and then returned to the host.
3) APP connects to the second or third device….. device, please unbind the app first, and then connect the device.
Note: The connection of the device cannot be connected under the Bluetooth function of the mobile phone. You must connect to the device before you can use it in the app.
3. Connection and matching considerations
1) Make sure the Bluetooth of the mobile phone is turned on;
2) Make sure that the equipment is fully charged, please turn it on or charge before use;
3) Make sure the device is within 50cm of the phone when pairing the connection;
4) If the Android phone does not find the device in the mobile app, please check whether the “AMKang” is allowed to use Bluetooth in the phone permission setting;
5) When pairing the headphones, make sure that the headphones are taken out from the wristband host; if no Bluetooth is found, put the headphones into the wristband and take them out.
Bluetooth headset function instructions and precautions
A. Headset pairing
1. Headset pairing: Take the earphone out of the wristband host, there is a power-on prompt tone, turn on the Bluetooth in the phone settings, find the corresponding Bluetooth name (SH30L) and pair it with the connection. (The headset is already connected and the pairing is good before leaving the factory. After that, only the name of the main Bluetooth is displayed, with “L”). After the pairing is successful, the setting shows “Connected”, indicating that the product connection is successful.
2. After the headset is successfully paired, put it back into the wristband host, and then remove the headset from the wristband host to automatically power on and automatically connect.
3. After the headset is successfully paired, if the phone is manually disconnected, you need to reconnect in the Bluetooth settings of the phone.
4, headset pairing: first turn off the two headphones, then long press the button 16S, release the hand, and then press the button at the same time will automatically complete the pairing. The Bluetooth function in the phone settings must be turned off for the connection.
B. The middle touch button of the earphone is a dedicated button for the Bluetooth earphone, which is used for answering incoming calls, rejecting incoming calls, muting calls, calling back calls, and activating voice assistants in the headset state.
C. Answer/hang up/reject calls
When the earphone is in the base of the wristband, there is an incoming call, and it is taken out from the base to automatically connect. The earphone is long outside the base of the wristband, and the incoming call needs to be manually answered.
Double-click the button to answer the call;
Double click to hang up the phone;
Long press to reject the call;
During the call, put the headset back to the base headset to turn off the phone, and the other party does not turn off the phone, then automatically switch to the mobile phone to answer.
D. Mute the call
While the headset is in a call, press and hold the touch button 3S to enter the mute, then press and hold to return to the call.
When the headset has an incoming call in the base of the bracelet, the device will vibrate and display a reminder. Touch the touch button to remotely operate the manual mute. Press and hold the touch button for 3 seconds to reject it directly.
E. Call back
Double-click the button to call back the number of the last call.
F. Voice assistant and call
When the headset is connected, 3 touch the touch button to activate the siri of the iphone, the voice assistant of the android phone, and the voice assistant can be used to pull out the phone and check the weather. The execution success rate of the command after activating the voice assistant is related to the intelligence level of the mobile phone voice assistant itself.
When activating the voice assistant, you must ensure that the headset is away from the base of the bracelet and is in active connection with the Bluetooth of the mobile phone. The activation operation is only valid on the standby interface or the time main interface.
Precautions
1. It is forbidden to use the adapter with charging voltage >5v and charging current >2A, charging time is 60 minutes;
2. It is forbidden to charge in case of water stains;
3. It is forbidden to soak, swim, dive, diving, hot shower;
4. This product does not support waterproofing. Please remove it when washing hands, rain, strenuous exercise, etc., which may cause the equipment to enter the water.
5. This product is an electronic monitoring product, not for medical reference, the data is for reference only;
6. Blood pressure test method: Please keep your body relaxed and still when testing, and make sure the wristband is at the same height as the heart. Please do not speak when testing;
7. Wearing the ear during strenuous exercise may cause the product to be damaged or lost during exercise.